One of the most common types of computer screens is the LCD screen. It has been used to watch movies, browse the internet, or just enjoy your favourite games. But what happens when water gets inside the screen? This blog post will tell you how to remove water from LCD screen and get them back working efficiently.
How to Get Water out of Your Computer LCD Screen?
If you find water on your computer’s LCD screen, don’t panic! You can get the water out of your LCD screen by following a few simple procedures.
- Remove the device’s power cord.
- Remove any screws that may be holding the case or cover on.
- Pry off the case or cover, take care not to scratch anything underneath.
- Gently clear away any particles or residue that may have amassed on the screen’s surface over time.
- Wipe down the screen with a dry cloth or paper towel to remove any remaining water droplets or moisture before replacing the case or cove.
Read More: LCD Vs LED Monitor For Graphic Design
5 methods to remove water from LCD screen
We all know that water is not something you want to leave on your electronics, but it can be quite difficult to remove without the right tools. However, there are 5 easy ways to dry out an LCD screen without having to purchase special products or use harmful chemicals that may harm your device.
Method 1: Water Absorbent Paper Towels
There are several techniques for removing water from an LCD panel. One is to use water-absorbent paper towels. To use this method,
- Take a stack of absorbent paper towels and place them over the wet area on your LCD screen.
- Make sure that there are no gaps in between the towel and your screen so that air can’t get in.
- Leave the paper towels on for about 10 minutes or until they have absorbed all the water on the surface.
- Then remove the paper towels and your LCD screen should work fine again.
Method 2: using a hair dryer
If you have a hair dryer, you can use it to try to remove the water from your LCD screen.
- First, turn the hair dryer on its lowest setting and hold it against the glass in the area where the water is located.
- Allow the heat to work its way through the glass and into the water. Be patient; it can take a while for this process.
- If the water doesn’t start coming off right away, increase the hair dryer’s setting until it does.
- Once the water is removed, Clean the entire screen surface with a cloth or paper towel.
Method 3: use a vacuum cleaner
If you have a vacuum cleaner, it is possible to remove water from LCD screens.
- Turn on the vacuum cleaner and attach the hose to the port that is closest to the LCD screen.
- Turn the vacuum cleaner on to its highest setting and wait until it has built up enough suction to start removing water.
- Hold the LCD screen close to the hose and wait for water droplets to start flying out of the screen.
- Keep holding the LCD screen close to the hose and use your vacuum cleaner’s power to suck all the water out of the screen.
Method 4: Use a Fan To Dry the LCD Screen
If you have a water droplet or spot on your LCD screen, you can use a fan to help dry it out. Turn off the gadget and unhook the power cord. Remove any screws holding the screen cover in place.
If any adhesives or tapes are holding the screen in place, break them apart using a blunt object, like a screwdriver. Place the fan over the area that needs to be dried and turn it on. The fan will help circulate air and help dry out the area. Replace the LCD screen cover and screws when finished.
Method 5: using rice
We can dry an LCD screen out using a variety of techniques. The most common method is to use rice. Here’s how to do it:
- Gently place 1-2 cups of uncooked white rice onto the surface of the LCD screen.
- Gently press the rice against the water droplets until they are absorbed.
- Wipe off any excess rice with a cloth or paper towel.
- Repeat as necessary until the water is gone.
You can also check: How to fix monitor randomly going black?
Signs Of Computer Screen Water Damage
If you notice any of the following indications that your computer screen is water damaged, it’s time to take action:
- Your computer won’t turn on.
- The computer screen becomes fuzzy or shows spots or lines.
- The computer starts making unusual noises.
- The LCD screen becomes unresponsive to touch or pressure.
- The liquid has begun corroding components of the hardware, such as the motherboard or processor.
How to prevent further damage to the LCD screen from water
If your device has an LCD screen, it’s important to take steps to protect it from water damage. Here are a few tips to help:
- Keep devices away from water. If you can, keep devices out of direct water contact.
- Don’t let liquids or moisture get inside the device. If you spill something on your device, immediately remove any excess liquid and dry off the device.
- Keep LCD screens clean. To keep LCD screens clean and free from fingerprints, smudges, and other contaminants, use a soft cloth with mild soap and lukewarm water. Make sure to rinse off all soap residue.
- Replace batteries as needed. If your device doesn’t have replaceable batteries, try to avoid letting it run out of power completely by charging it when you can and using it sparingly in areas where water is not likely to be present (like the bedroom).
Conclusion
If you’re like most people, you’ve probably seen ads for products that promise to remove water from an LCD screen. While these products may work well on a computer monitor, they are usually not effective on a television or other large screen.
In fact, many of these products can actually damage the screen and make it difficult to use. If you need to remove water from the LCD screen, there are safer and more effective ways to do so.
